3 Meter OS2 LC to LC Fiber Optic Cable – Single Mode

Key Features of 3 Meter OS2 LC to LC Fiber Optic Cable:

1. Length: 3 meters (approximately 9.8 feet), suitable for connecting devices that are relatively close but not adjacent.
2. Type: OS2 single-mode fiber optic cable, which is optimized for long-distance and high-performance data transmission.
3. Connectors:
   • LC to LC: LC connectors are small form factor connectors that are easy to install and known for their high performance. Both ends of the cable have LC connectors.
4. Core Diameter:
   • 9/125 microns: This is the standard for single-mode fibers, where the core diameter is 9 microns and the cladding diameter is 125 microns.
5. Jacket:
   • Yellow Jacket: Single-mode cables are typically color-coded yellow to distinguish them from multi-mode cables.
6. Standards Compliance:
   • ITU-T G.652.D: This standard specifies the characteristics of single-mode optical fibers.
   • Low Water Peak: Designed to minimize signal loss due to water absorption.

Benefits:

• High Performance: Single-mode fibers support higher bandwidth and longer transmission distances compared to multi-mode fibers.
• Low Attenuation: OS2 fibers have low signal loss, which is essential for long-distance communication.
• Compact Connectors: LC connectors are smaller than traditional connectors, allowing for higher density in patch panels and other networking equipment.

Usage Scenarios:

• Data Centers: Ideal for connecting switches, servers, and other network devices in data centers.
• Telecommunications: Used in telecommunications to transmit data over long distances with minimal loss.
• Campus Networks: Suitable for connecting buildings in a campus network setup.
• Enterprise Networks: Used in large enterprises for backbone connections due to its high performance and reliability.

Considerations:

• Single-Mode Compatibility: Ensure that the network devices you are connecting are compatible with single-mode fiber.
• Distance Requirements: While 3 meters is relatively short for single-mode fiber, ensure that this length meets your specific installation requirements.
• Connector Type: Verify that the devices or patch panels you are connecting have LC connectors.

Key Features of 20m OS2 SC to SC Fiber Patch Cable:

1. Length:
   • 20 meters (approximately 66 feet), suitable for spanning considerable distances within or between buildings.
2. Type:
   • Single-Mode Fiber (OS2): Optimized for long-distance data transmission with minimal signal loss.
3. Connectors:
   • SC to SC:
     • SC (Subscriber Connector): Standard square connectors known for their push-pull mechanism, providing secure and reliable connections. Both ends of the cable are equipped with SC connectors.
4. Core Diameter:
   • 9/125 microns: Standard for single-mode fibers, where the core diameter is 9 microns and the cladding diameter is 125 microns.
5. Jacket:
   • Typically Yellow: Single-mode fiber cables are generally yellow to distinguish them from multi-mode fibers.
6. Standards Compliance:
   • ITU-T G.652.D: This standard specifies the characteristics of single-mode optical fibers, ensuring compatibility and performance.
   • Low Water Peak: Designed to minimize signal loss due to water absorption.

Benefits:

• Long-Distance Transmission: Ideal for applications that require high-performance data transmission over long distances.
• High Bandwidth: Supports high-bandwidth applications, making it suitable for data-intensive operations.
• Low Attenuation: The OS2 specification ensures low signal loss, crucial for maintaining data integrity over long distances.
• Reliable Connectors: SC connectors are known for their durability and ease of use, providing a secure and stable connection.

Usage Scenarios:

• Data Centers: Connecting network equipment across larger data center environments.
• Telecommunications: Used in telecom networks for long-distance, high-reliability data transmission.
• Campus Networks: Connecting buildings within a campus, providing a high-speed backbone.
• Enterprise Networks: Backbone connections in large enterprise networks to ensure efficient data flow.
• Inter-Building Connectivity: Suitable for connecting devices between different buildings within an organization.

Considerations:

• Compatibility: Ensure that the network devices and infrastructure you are connecting support single-mode fiber and SC connectors.
• Distance Requirements: The 20-meter length is ideal for long-distance connections; verify that this length meets your specific needs.
• Connector Type: Confirm that your devices or patch panels are equipped with SC ports.

Key Features of 4m Single-Mode Fiber Patch Cable SC - SC:

1. Length:
   • 4 meters (approximately 13.1 feet), providing flexibility for various network setups within a reasonable distance.
2. Type:
   • Single-Mode Fiber (OS2): Optimized for long-distance and high-performance data transmission with minimal loss.
3. Connectors:
   • SC to SC:
     • SC (Subscriber Connector): A standard square connector known for its reliable performance and easy push-pull design. Both ends of the cable have SC connectors.
4. Core Diameter:
   • 9/125 microns: Standard for single-mode fibers, indicating a 9-micron core and a 125-micron cladding diameter.
5. Jacket:
   • Typically Yellow: Single-mode cables are usually yellow to distinguish them from multi-mode fibers.
6. Standards Compliance:
   • ITU-T G.652.D: Specifies the characteristics of single-mode optical fibers, ensuring compatibility and performance.

Benefits:

• High Performance: Supports high bandwidth and long-distance transmission, making it ideal for demanding network environments.
• Low Attenuation: Designed for minimal signal loss, crucial for long-distance communication.
• Reliable Connectors: SC connectors are known for their stability and ease of use, providing secure and reliable connections.

Usage Scenarios:

• Data Centers: Essential for connecting high-performance network equipment over longer distances within data centers.
• Telecommunications: Used in telecom networks for long-distance data transmission with high reliability.
• Campus Networks: Suitable for inter-building connections on a campus, providing a high-speed backbone.
• Enterprise Networks: Ideal for backbone connections in large enterprise networks, ensuring efficient data flow.

Considerations:

• Compatibility: Ensure that your network devices and infrastructure are compatible with single-mode fiber and SC connectors.
• Distance and Performance: While 4 meters is relatively short for single-mode fiber, verify that this length meets your specific network requirements.
• Connector Type: Confirm that the devices or patch panels you are connecting have SC ports.

• Data centers
• Telecommunications networks
• Enterprise networks
• High-speed internet connections
• Fiber optic backbone installations
• Long-distance networking applications

Key Features of 3 Meters 10Ft SC to SC 9/125 Single-Mode Fiber Optic Cable Jumper:

1. Length:
   • 3 meters (approximately 10 feet), providing flexibility for connections within a network setup.
2. Type:
   • Single-Mode Fiber (9/125 microns): Optimized for long-distance and high-performance data transmission with minimal signal loss.
3. Connectors:
   • SC to SC:
     • SC (Subscriber Connector): Standard square connectors with a push-pull mechanism, known for their reliability and ease of use. Both ends of the cable are equipped with SC connectors.
4. Core Diameter:
   • 9/125 microns: Standard for single-mode fibers, where the core diameter is 9 microns and the cladding diameter is 125 microns.
5. Jacket:
   • Typically Yellow: Single-mode fiber cables are generally color-coded yellow to distinguish them from multi-mode fibers.
6. Standards Compliance:
   • ITU-T G.652.D: This standard specifies the characteristics of single-mode optical fibers, ensuring compatibility and high performance.
   • Low Water Peak: Designed to minimize signal loss due to water absorption.

Benefits:

• High Performance: Supports high-bandwidth and long-distance data transmission, making it ideal for demanding network environments.
• Low Attenuation: Ensures minimal signal loss, which is crucial for maintaining data integrity over long distances.
• Reliable Connectors: SC connectors are known for their secure and stable connections, providing ease of use and durability.
• Versatility: Suitable for various applications, including data centers, telecommunications, campus networks, and enterprise setups.

Usage Scenarios:

• Data Centers: Connecting servers, switches, and other network devices within data centers.
• Telecommunications: Used in telecom networks for reliable long-distance data transmission.
• Campus Networks: Connecting network devices across buildings within a campus environment.
• Enterprise Networks: Backbone connections in large enterprise networks to ensure efficient data flow.
• Patch Panels: Used to connect and manage fiber optic connections in network racks and cabinets.

Considerations:

• Compatibility: Ensure that your network devices and infrastructure are compatible with single-mode fiber and SC connectors.
• Distance and Performance: The 3-meter length is suitable for relatively short connections within a network setup; verify that this length meets your specific needs.
• Connector Type: Confirm that the devices or patch panels you are connecting have SC ports.

• Data centers
• Telecommunications networks
• Enterprise networks
• High-speed internet connections
• Fiber optic backbone installations
• Long-distance networking applications